Warren/Fenner: Failure to take cgicago into consideration the compression forces and outward forces generated when using locking devices. The mounted component must have sufficient wall thickness to withstand the outward forces or it will burst. Likewise when mounting on hollow-shaft or tubular applications. Inadequate wall thickness results in the hollow shaft or tube being compressed and distorted. Many pneumatic and air manufacturers publish a formula or table that lets designers calculate the required wall thickness.Vic/Rimtec: Having too much clearance between the shaft and hub is often a problem; you can''t clamp enough tool to transmit rated torque. Overtightening the screws is also common, causing tapers to lock oil when they''re supposed to disassemble. This is where locking devices with push-off screws come in handy.

Warren/Fenner: Failure to take cgicago into consideration the compression forces and outward forces generated when using locking devices. The mounted component must have sufficient wall thickness to withstand the outward forces or it will burst. Likewise when mounting on hollow-shaft or tubular applications. Inadequate wall thickness results in the hollow shaft or tube being compressed and distorted. Many pneumatic and air manufacturers publish a formula or table that lets designers calculate the required wall thickness.Vic/Rimtec: Having too much clearance between the shaft and hub is often a problem; you can''t clamp enough tool to transmit rated torque. Overtightening the screws is also common, causing tapers to lock oil when they''re supposed to disassemble. This is where locking devices with push-off screws come in handy.

Jim/Stafford: Early design involvement on the part of the manufacturer is the best way to make sure the resulting component will be reliable cgicago and effective.Jeff/Tollok: pneumatic Carefully review air your application requirements. tool Shaft material, hub material, transmittable torques, and bending oil moments can influence your selection of the proper locking assembly.Intelligent designWhat can DESIGNERS do when selecting and applying locking devices cgicago to improve productivity?Jeff/KTR: pneumatic Obtaining comprehensive technical information will improve selection and performance. Find a manufacturer that maintains the quality of materials, dimensions, and surface finishes.Jeff/Tollok: air Too often not enough questions are asked, and selections are made based on previous designs. Don''t use the same locking assembly tool simply because it was used elsewhere on the same machine or on a previous machine oil design. Involve your supplier and use their cgicago experience to get recommendations.