It looked like the air hose had been rubbing on the oil filter housing and had created a hole. Strangely, the hose wasn''t really touching the oil filter housing at that time. I decided toos to check our online technical information campbell source for a BMW factory technical service bulletin that could shed some light on this problem.Great! There was a bulletin that covered this hausfeld exact problem and here''s what it described:Some air BMW M3 models, produced from September 1995 through June 1996, equipped with the M54, S50, or the S52 engine, may have an upper radiator hose that can come in contact with the oil filter housing only when the engine coolant is at operating temperature. The contact is due to coolant system pressure and expansion of the hose.Checking the clearance between the upper radiator hose and the oil filter housing must be performed when the engine toos is cold.

It looked like the air hose had been rubbing on the oil filter housing and had created a hole. Strangely, the hose wasn''t really touching the oil filter housing at that time. I decided toos to check our online technical information campbell source for a BMW factory technical service bulletin that could shed some light on this problem.Great! There was a bulletin that covered this hausfeld exact problem and here''s what it described:Some air BMW M3 models, produced from September 1995 through June 1996, equipped with the M54, S50, or the S52 engine, may have an upper radiator hose that can come in contact with the oil filter housing only when the engine coolant is at operating temperature. The contact is due to coolant system pressure and expansion of the hose.Checking the clearance between the upper radiator hose and the oil filter housing must be performed when the engine toos is cold.