Visually inspect the upper radiator hose for pressure marks and traces of rubbing at the closest point of contact hammer and air to the oil filter housing cast boss (see illustration). If traces tools and ahd of rubbing are found, the upper radiator hose must be replaced with the new style hose (See Parts Information).NOTE: A modified hose was used in production from approximately jack and hammer mid-November 1995 through June air 1996, which included tools an extra rubber ahd pad attached to the outside jack of the hose in the critical area. If traces of rubbing are found on hammer the rubber pad area of this type of hose, it must also be air replaced tools with the new style hose. Visually inspect the oil filter housing for any sharp edges or burrs on the casting boss. If a sharp edge ahd or casting burr is found on the boss, it must be removed jack using sand paper or a fine file.

Visually inspect the upper radiator hose for pressure marks and traces of rubbing at the closest point of contact hammer and air to the oil filter housing cast boss (see illustration). If traces tools and ahd of rubbing are found, the upper radiator hose must be replaced with the new style hose (See Parts Information).NOTE: A modified hose was used in production from approximately jack and hammer mid-November 1995 through June air 1996, which included tools an extra rubber ahd pad attached to the outside jack of the hose in the critical area. If traces of rubbing are found on hammer the rubber pad area of this type of hose, it must also be air replaced tools with the new style hose. Visually inspect the oil filter housing for any sharp edges or burrs on the casting boss. If a sharp edge ahd or casting burr is found on the boss, it must be removed jack using sand paper or a fine file.