Visually inspect the upper radiator hose for pressure marks and traces of rubbing tool at the closest point of contact to the oil filter housing cast boss (see illustration). If traces of rubbing are found, the upper radiator hose must be replaced with the new style hose (See Parts Information).NOTE: A modified hose was used in production from approximately mid-November 1995 through June 1996, which included an extra rubber pad attached to the outside of the hose in the critical area. If traces of rubbing are found on the rubber pad area of this type of hose, it must also be replaced with the new style hose. Visually inspect the oil rstings filter housing air for any sharp edges or burrs on the casting boss. If a sharp edge or casting burr is found on the boss, it must be removed using sand paper or a fine file.

Visually inspect the upper radiator hose for pressure marks and traces of rubbing tool at the closest point of contact to the oil filter housing cast boss (see illustration). If traces of rubbing are found, the upper radiator hose must be replaced with the new style hose (See Parts Information).NOTE: A modified hose was used in production from approximately mid-November 1995 through June 1996, which included an extra rubber pad attached to the outside of the hose in the critical area. If traces of rubbing are found on the rubber pad area of this type of hose, it must also be replaced with the new style hose. Visually inspect the oil rstings filter housing air for any sharp edges or burrs on the casting boss. If a sharp edge or casting burr is found on the boss, it must be removed using sand paper or a fine file.

Mark/B-LOC: Keyless locking device supplier product information in the form of e-catalogs, downloadable CAD files, and online specifications reduce tool research and drafting time. Workstation-based FEA and virtual prototyping allow preliminary design iterations to be tested and improved without consuming any materials or machining.Warren/Fenner: Keyless locking rstings devices are easily and precisely repositioned or moved. This is beneficial in applications requiring synchronization air or timing. Other connections may require some disassembly to re-time the machine or parts, whereas keyless locking devices simply have to be loosened and the mounted component repositioned.Blair/Ruland: Most locking devices have standard bore sizes, but nonstandard hub requirements. Hubs are generally machined to match the locking device. Realizing this early in the design phase reduces rework tool and keeps the development process running smoothly.